BELT CONVEYOR WITH TRIPPER
LOADING AND UNLODING GRAINS
Prime Agriculture s.r.l. range of belt conveyors are suited to both agricultural and industrial applications up to 800tph based on wheat at 750kg/m³. They are manufactured using high quality, durable galvanised steel and have a three piece steel trough construction or a three roller trough belt assembly. In agricultural applications these conveyors are ideal for filling large storage sheds. A belt conveyor can be positioned in the apex of the building and a winched tripper can discharge grain all the way along the building avoiding the peaks and troughs formed by using a chain and flight conveyor with separate outlets.
Technical specifications
- There are also many inclined applications up to 30 degrees depending on the product being handled.
- Three piece steel trough construction or with a three roller trough belt assembly.
- These designs give an exceptionally rigid construction, easily capable of spanning 6m building bays.
- The section joints are of dimpled style, guaranteeing accurate alignment, and a smooth and strong connection.
- The tripper device can either be motorised or hand operated. It is of winched design: there is no electrical power supply to the tripper requiring an expensive catenary cable.
- Two manually adjusted tensioning screws are fitted to the tail end. Belt take up unit fitted on legnths over 50m
- Gravity tensioner unit also available.
- The belt is of a PVG compound type, with a polyester carcass, giving excellent oil, mildew and rot resistance, flame retardance to ISO. 340 and a satin top cover finish for improved product release.
- Other belt types can be grip face or chevron for use on inclined applications.
- A manually adjusted fixed brush is fitted , which will give excellent belt cleaning under most conditions. For more demanding conditions Rosta suspension units can be added, giving a sprung loaded brush or scraper as required. In exceptional situations, rotary brushes or proprietary scrapers may be fitted. In all cases adjustment and servicing of the cleaning device is straightforward. Provision is also made for fitting cleaning devices for the underside of the belt if this is found to be necessary.
What's included:
- All galvanised construction as standard.
- Troughs supplied in standard lengths of 2.4m, 1.8m, 1.5m, 0.9m and 0.6m, preassembled
- Belt take up unit on all lengths 50m and over.
- Drive and tail section.
- Manually adjusted brush at drive end.
- All motors and gearboxes are factory fitted.
- PVG compound belt with good oil, mildew and rot resistance with factory fitted lace joiner.
Optional extras:
- Inlet hopper.
- Weather proofing.
- Manual / motorised tripper.
- Rotary brush.
- APEX belting and other specialist belting available.